I’m porting a MQTT client program from nRF52840 (using WIZnet 5500) to LPC1768 (using internal EMAC with DP83848 PHY). However, nothing relating to EthernetInterface seems to work. I even testing the bare minimal example code from the EthernetInterface API doc page. The only thing I change is using…

LPC1768 EthernetInterface stuck at low level OS calls

MultipleMonomials (Jamie Smith) September 15, 2020, 9:47pm 2

Have you updated the firmware on your LPC1768 DAP interface to the newest version? I believe that the board currently ships with a version so old that basic MBed 5/6 functionality doesn’t work.

Mbed LPC1768 no longer supported?

Topic		Replies	Views
EthernetInterface in mbed OS5 with lan8720 Mbed OS	18	2441	January 17, 2020
Ethernet on LPCxpresso1769 with mbed library Boards mbed_os , ethernet	1	391	January 9, 2020
TCP/IP Server with LPC4088 Application development	2	342	February 10, 2021
Ethernet example with MBED OS6 on NXP1768 Mbed OS	2	267	October 27, 2020
"Mbed OS Example" client cannot connect to local server Mbed OS	0	330	September 10, 2020

LPC1768 EthernetInterface stuck at low level OS calls

Related Topics