MAX32630FTHR BLE error

[gerriko (Gerriko IO)]

Sorry my error.

For some reason I thought you were using the latest MAX32680 microcontroller rather than the MAX32630.

It is worth searching through the forum as there is plenty (the good, bad & ugly) about the MAX32630FTHR.

MAX32630FTHR and BLE?

Hi. I’m new to this device, and to Mbed, so very likely I’m doing something wrong, but the BLE HR below example does not seem to work. Can anyone verify it actually works using that board ? I have gotten some other examples working (like the PWM blinky and regular blinky). Have tried using both the web-ide and Mbed studio. This post seems to confirm there are some issues, but even after applying the suggested fix it does not seem to work. https://os.mbed.com/questions/78005/Using-MAX32630…

If that link is TL;DR, then basically the BLE module on max32630fthr micro is a peripheral device and thus requires TI specific CC256x HCI commands to get it to work with the micro. There is no longer an API within Mbed OS 6 to bridge this with the cordio stack.