Fail.txt Error on FRDM k-64

amichael10 · February 18, 2021, 1:32pm

when i copy a bin file to frdm with daplink installed, i get a fail.txt file and the file doesn’t copy

error: Flash algorithm erase sector command FAILURE
type: target

Does this mean my board is damaged?

MACRUM · February 18, 2021, 1:58pm

Hi,

I recommend to perform full chip erase by DAPLink action command.

github.com

ARMmbed/DAPLink/blob/main/docs/MSD_COMMANDS.md#action-commands

# MSD Commands

DAPLink allows you to give it some simple commands via its MSD interface. By 
copying a file with a certain name to the root of the DAPLink MSD drive, you 
can get DAPLink to either perform an action or configure a flash-persisted 
option. The contents of the file are ignored; you can pass it an empty file.

MSD commands only work if you are either holding down the RESET button 
when you add the file to the MSD drive, or if you've turned on DAPLink's 
automation-allowed mode. Of course, the way you turn on automation-allowed 
mode is via an MSD command (see below). So, you'll either hold the RESET 
button each time you invoke an MSD command or you'll do so only once to turn 
on automation-allowed mode. The automation-allowed mode is saved in flash and 
so it persists across board reboots.

By convention, files that end with ``.act`` trigger an action; files that end 
with ``.cfg`` configure a behavior. The mechanism is case-insensitive.

Every command completes by remounting the DAPLink MSD drive. Every command 
is supported in both interface and bootloader mode.

This file has been truncated. show original

Create erase.act file
Copy the file to DAPLink

Topic		Replies	Views
Daplink & Arch Pro board Mbed OS	0	227	October 29, 2021
K64F "The interface firmware FAILED to reset/halt the target MCU" Mbed OS	3	818	October 11, 2021
DAPLink bootloader update / flash problem Boards	0	459	August 17, 2020
DAPLink firmware binary files Mbed OS	2	1880	March 18, 2020
Nordic52840DK Use Mbed_IDE Online compiler nordic-semiconductor	3	696	February 29, 2020

Fail.txt Error on FRDM k-64

Related topics