MAX3260FTHR# Not Booting After Firmware Upload**

I’m working with the MAX3260FTHR# and pairing it with the MAX30003 AFE. I’m trying to upload firmware to the development board by copying the respective .bin file to the DAPLINK folder. After doing this, the red LED on the MAX3265PICO# blinks, indicating that the firmware upload process is happening.

However, I notice that no LEDs blink on the MAX3260FTHR#, and I’m unable to reset or reboot it. When powered, the board does not light up, but I measured 3.3V and 5V at the respective pins, so power seems to be reaching the board.

Has anyone encountered a similar issue? Any suggestions on troubleshooting or resolving this?

Thanks in advance!

Hello,

The firmware is provided by Maxim so I believe fastest way is visit Maxim’s web/repos.

analogdevicesinc/max32625pico-firmware-images

BR, Jan

Thanks for your response; But I’ve successfully uploaded the firmware to the PICO, but I’m facing an issue with the MAX3260FTHR board. The board isn’t responding—no blinking LEDs or signs of activity, even after a reset. I’ve double-checked the connections and tried different USB cables. Still no luck.