Hi All, I am using two Nucleo board (F746ZG and F746ZG) both are same to simulate a Serial communication. The HW Connection is as follows MAIN-NUCLEO (STM32-F746ZG) and SUB-NUCLEO(STM32-F746ZG) F746ZG pin-PC_12(TX) —>F746ZG pin-PG_9 (RX) F746ZG pin-PD_2(RX) —>F746ZG…

Hello, thank you for code formatting but not understand why new topic again… pc.printf and printf have same efect would be good to use just one. scanf is also on same uart variable i has to be increase after sucesful send and not in the loop because the loop can be much faster than UART will be a…

Nucleo to nucleo serial Communication via TX and RX pins

Mbed OS

fermedicius (Fermedicius Labs) February 2, 2024, 1:02pm 3

working fine i add some delay before variable increment, thanks very much to johnnyk…

Topic		Replies	Views
Nucleo to nucleo serial Communication via TX and RX Mbed OS mbed_client , mbed_tls , stmicroelectronics , usb-device , mbed-studio	6	269	January 31, 2024
Two Nucleo Serial Communication via TX and RX and vice versa Mbed OS	7	1961	April 28, 2020
Two Nucleo boards (NUCLEO-F746ZG to NUCLEO-F746ZG) to communicate with each other using SPI Mbed OS mbed_client , stmicroelectronics , ble , usb-device , mbed-studio	9	214	March 15, 2024
Two Nucleo F446RE Bidirectional Serial Communication via TX and RX Mbed OS mbed_os , stmicroelectronics	1	560	November 19, 2021
Arduino to nucleo communication Mbed OS	2	249	July 7, 2020

Nucleo to nucleo serial Communication via TX and RX pins

Related topics